rc-car-news
 20.12.2022 CS-Electronic 
Schumacher CAT L1R
CS-Electronic Schumacher CAT L1R
 
CS-Electronic freut sich Ihnen den neuen 1/10 4WD Competition Off Roader CAT L1R vorstellen zu können. Der Schumacher CAT L1R bringt die neuesten Entwicklungen des Schumacher International Racing Teams mit, um einen weiteren sensationellen 4WD-Buggy herzustellen. Der L1R verfügt über eine verbesserte Aufhängungsgeometrie, geringeres Gewicht, bessere Haltbarkeit und eine neue JConcepts Karosserie. Die L1-Buggy Serie hat bereits die europäische EOS Meisterschaft, die britische BRCA Meisterschaft und die USA ROAR carpet nationals gewonnen. Der L1R ist ein fantastisch aussehender Buggy, der auf allen Arten von Strecken sicher ein Gewinner sein wird.


Check Out the 26 NEW FEATURES below.
• New - Front hub carriers with screw on steering plates, allows adjustability to suit all track conditions.
• New – Layshaft and slipper plates with M4 layshaft Nut. Lightweight, twin pad slipper clutch with Ultra Fine adjustment spring. The new drive interface for the plates and gears allows more true/concentric running and improves the efficiency.
• New – Rear suspension geometry for more stability and improved rear traction. This new geometry keeps the car flatter in the turn while maintaining its grip through the corner.


New – Wider suspension mounts.
• New - Rear hub carrier with larger outer hub bearings and multi positional camber settings. 10 camber link positions on one plate with shims to adjust the vertical height.
• New – Longer rear U/J steel driveshafts.
• New – Rear camber strap.
• New - Hard anodised -1.5mm width, 12mm wheel hex.
• New – Suspension pivots inserts for more accuracy and durability. Steel top hat bushes for longer lasting pivots and a greater span for the bearing area of the effective hinge pin length.


New – JConcepts bodyshell design. Popular well known style which offers a great balance of steering and stability.
• New – Shorter front U/J driveshafts. More forward drive and reactiveness.
• New - Longer front diff outputs.
• New – Stronger front upper transmission housings.
• New – Updated front wishbones.
• New – Steering ball cup and 5.5mm ballstuds.
• New – Front inner 3.5mm hingepin with raised position. For more forward drive and agility.


New – Low CofG pinned and centre mounted motor mount. That allows full height shorty lipos to fit in the new forward mounting position. The Lipo position is 9mm further forwards than the previous model.
• New - Hard anodised 2mm 7075-T6 alloy chassis. Pocketed for easy radio access with S2 removable trays. Sleak new shape to the rear of the light weight and flexible chassis which allows the car to transfer weight to the rear through corners without the chassis catching the track.
• New - Moulded composite side pods. Allowing the flex to remain with these soft high quality moulding
• New – Easy access LiPo mounting with further forward positioning.
• New - 3 piece top decks.


New – Longer rear shock shaft.
• New – Rear 1.8mm Anti-roll bar to match the new geometry, included.
• New – Gear diff pulley housing with thicker planetary gear shim for better durability. Improved efficiency of the diff in the run.
• New – Moulded shock pistons and bushes.
• New - ´S2 shock brackets. To suit the new front and rear geometry´s


Equipment Needed
2 Channel Radio
Motor
Servo
Electric Speed Control
2S Shorty LiPo Battery
Tyres & Inserts
Paint for Bodyshell
Long Boss Motor Pinion

CAT L1 R Specification
Power Source: ELECTRIC
Model Type: 4WD, OFF-ROAD, COMPETITION
Length: 375mm
Width: 245.5 - 250mm
Top Speed: 40 MPH+
Wheelbase: 280-286mm


CAT L1R - KIT
No. K201


rc-car-news.de  |   Kontakt / Impressum / Datenschutz  |   © nowack-fotodesign.de

rc-netzwerk.de  |   rc-car-rennsport.de  |   rc-flieger-news.de  |   rc-boote-news.de  |   rc-car-magazin.de